Luoyang Zhongtai Industrial Co., Ltd.
Our Values Trust and reputation are a channel in the success and prosperity of ZTIC. Through valued employee loyalty and expertise ZTIC gives its customers a high degree of confidence. Through a
Add to Cart
Multi-rope Friction Mine Hoist -JKM Tower Multi-Rope Friction Mine Hoist,JKMD Landing Multi-Rope Friction Mine Hoist
1. The technical characteristics of mine hoist designed and developed by Luoyang Mining Machinery Factory and Research Institute are:
(1) The use of integral, two-flap type, four-flap type of various types of drum;
(2) Drum rope groove adopts processing spiral rope groove, folding rope groove or wood lining and plastic lining pressed spiral rope groove, steel rope transition device is set between the ropes;
(3) Using cylinder rear disc brake, electro-hydraulic joint control; Hydraulic station can be divided into two types: middle and low pressure and middle and high pressure. There are two kinds of constant braking force electric delay and hydraulic delay two-stage brake in middle and low pressure hydraulic station; Middle and high pressure hydraulic station has two forms of constant deceleration and constant braking torque secondary braking. Hydraulic station can be equipped with pressure sensor, pressure relay;
(4) Spindle and drum are connected by plane friction with large torque;
(5) Signal monitoring device composed of photoelectric encoder, self-leveling machine and low-speed Chilean tachogenerator, with overspeed, overwinding, depth indication failure, brake shoe wear, spring fatigue and other perfect monitoring and protection functions;
Bring console has integral and two forms of separate all adopt the electric meter of integrated light, reliable in performance and new type integral operation handle, and a digital depth indicator and digital and screw type depth indicates the depth indicator system as a whole, has a mesa of industrial TV or computer, printer and other special;
(6) The pulley device adopts integral or two-flap welding structure, supported by rolling bearing and friction liner with POLYvinyl chloride or nylon on the rim;
(7) Can be equipped with mine hoist network control and diagnosis system.
Advantages of Conveying Hoisting Machine
2. Advantages of multi-rope friction type mine hoist:
(1) The load is borne by a number of wire rope, wire rope diameter is small, equipment size is small. That is, under the same diameter specification, the lifting capacity is large;
(2) The wire rope is put on the drum, not affected by the rope capacity, suitable for deep Wells;
(3) small inertia, small energy consumption under the same output;
(4) when the tank is stuck or overrolled, it can slip to avoid breaking the wire rope;
(5) the possibility of wire rope breaking at the same time is small, without anti-drop device;
(6) The same number of left twist and right twist wire rope can be used to offset the loose twist trend, to avoid the pressure of the container ear on the tank channel;
3. Typical product introduction of Conveying Hoisting Machine :
(1) Floor type multi-rope friction mine hoist with the largest diameter:
Jkmd-6.2 ×4 ⅲ multi-rope friction type mine hoist
User: Huaneng Gansu Energy Company Hetaoyu mine auxiliary shaft
Used in auxiliary shaft, lifting materials, personnel, and large trackless rubber wheel vehicle (multi-function vehicle, support carrier), the whole hydraulic support and other large parts;
Diameter of friction wheel: 6.2m
Diameter of pulley: 6.2m
Lifting height: 975m
Diameter of wire rope: 66mm
Maximum static tension: 1700KN
Maximum static tension difference: 340KN
Maximum lifting speed: 11.3m/s
Friction coefficient of liner: 0.25
Motor: TDBS3000-24
3000kW, 1450V, 34.8r/min,
Frequency conversion synchronous machine, Shanghai Electric Machinery Factory
(2) The largest diameter tower multi-rope friction mine hoist:
Jkm-5 ×6 ⅲ multi-rope friction mine hoist
User: Auxiliary shaft of Chahasu Coal Mine, Inner Mongolia, China Power Construction Investment
Diameter of friction wheel: 5m
Guide wheel diameter: 5m
Lifting height: 446.5m
Diameter of wire rope: 52mm
Maximum static tension: 1700KN
Maximum static tension difference: 340KN
Maximum lifting speed: 9.42m/s
Friction coefficient of liner: 0.25
Motor: low speed direct and direct
Variable frequency synchronous motor
3000 kw, 3150 v,
36r/min, Siemens motor
(3) Multi-rope friction mine hoist with maximum diameter and maximum single power:
Jkm-4.7 ×6 ⅲ multi-rope friction hoist
User: Inner Mongolia Yinhong Energy Development Co., LTD. Bojiang Haizi mine main well
Diameter of friction wheel: 4.7m
Guide wheel diameter: 4.7m
Lifting height: 580m
Diameter of wire rope: 47mm
Maximum static tension: 1500KN
Maximum static tension difference: 440KN
Maximum lifting speed: 12m/s
Friction coefficient of liner: 0.25
Motor: TDBS5500-16
Low speed direct link variable frequency synchronous motor
5500 kw, 3150 v,
48.8r/min, Shanghai Electric Machinery Factory
(4) Multi-rope friction mine hoist with maximum diameter and maximum power of each single machine:
Jkmd-5.7 ×4 ⅳ multi-rope friction hoist
User: Main shaft of Zhangji coal mine of Huainan Mining Bureau
Diameter of friction wheel: 5.7m
Guide wheel diameter: 5.7m
Lifting height: M
Diameter of wire rope: 57mm
Maximum static tension: 1500KN
Maximum static tension difference: 440KN
Maximum lifting speed: 14m/s
Friction coefficient of liner: 0.25
Motor: BPT3000-24/3250
Low speed direct frequency motor
3000 kw (2150 V,
40.2r/min, Harbin Electric Machine Factory
(5) Multi-rope friction type mine hoist with the largest lifting height:
Jkm-4.5 ×6 ⅲ multi-rope friction hoist
User: New main shaft of Chengchao Iron Mine of Wisco Mining Group
Diameter of friction wheel: 4.5m
Guide wheel diameter: 4m
Lifting height: 1150m
Diameter of wire rope: 44mm
Maximum static tension: 1400KN
Maximum static tension difference: 400KN
Maximum lifting speed: 12m/s
Friction coefficient of liner: 0.25
Motor: TBP4800-16/3280
Low speed direct frequency motor
4800 kw, 3150 v,
50r/min, Harbin Electric Machine Factory
(6) Floor-type multi-rope friction mine hoist with the largest diameter of wire rope:
Jkmd-6.2 ×4 ⅲ multi-rope friction hoist
User: Huaneng Gansu Energy Company Hetaoyu mine auxiliary shaft
Used in auxiliary shaft, lifting materials, personnel, and large trackless rubber wheel vehicle (multi-function vehicle, support carrier), the whole hydraulic support and other large parts;
Diameter of friction wheel: 6.2m
Diameter of pulley: 6.2m
Lifting height: 975m
Diameter of wire rope: 66mm
Maximum static tension: 1700KN
Maximum static tension difference: 340KN
Maximum lifting speed: 11.3m/s
Friction coefficient of liner: 0.25
Motor: TDBS3000-24
3000kW, 1450V, 34.8r/min,
Frequency conversion synchronous machine, Shanghai Electric Machinery Factory
4. Product parameters of Conveying Hoisting Machine
(1)JKM tower multi-rope friction mine hoist
| Model | Guide wheel diameter | Wire rope | Maximum lifting speed | Reducer | Displacement weight of rotating parts (except motor and guide wheel) |
Guide wheel displacement weight | Dimensions (L×W×H) | Note | |||||
| Maximum static tension | Maximum static tension difference between two wire ropes |
Maximum diameter with guide wheels |
Maximum diameter without guide wheel | Interval | |||||||||
| m | kN | mm | m/s | Model | Velocity ratio | t | t | m | |||||
| JKM-1.3×4(Ⅰ)E | 100 | 25 | 16.5 | 200 | 5 | XP550 | 11.5 | 2.1 | 6.4×6.5×1.6 | ||||
| JKM-1.6×4(Ⅰ)E | 150 | 40 | 19.5 | 8 | XP560 | 7.35 10.5 11.5 | 4 | 6.4×7×1.75 | |||||
| JKM-1.85×4(Ⅰ)E | 210 | 60 | 23 | 10 | XP800 | 5.8 | 7×7.5×2.02 | ||||||
| JKM-2×4(Ⅰ)E | 2 | 230 180 | 65 55 | 20 | 24 | 10 | XP800 | 5.7 | 7×8×2.2 | In this table, weights and dimensions do not include micro - drag devices | |||
| JKM-2.25×4(Ⅰ)E | 2 | 215 | 65 | 22 | 28 | 10 | XP800 | 6.5 | 1.39 | 7.4×8×2.3 | |||
| JKM-2.8×4(Ⅰ)E | 2.5 | 335 | 100 | 28 | 250 | 14 | XP1
000 | 9.1 | 2.48 | 8.5×10×2.65 | |||
| JKM-2.8×4(Ⅱ)E | P2H630 | 10 | 2.48 | 7.5×8.5×2.65 | |||||||||
| JKM-2.8×6(Ⅰ)E | 2.5 | 500 | 140 | 28 | 14 | XP1120 | 15.8 | 3.69 | 8×8.5×2.68 | ||||
| JKM-2.8×6(Ⅱ)E | P2H800 | 17.8 | 3.69 | 7.5×8.5×2.68 | |||||||||
| JKM-2.8×6(Ⅲ)E | 14 | 3.7 | 7.5×8×2.7 | ||||||||||
| JKM-3.25×4(Ⅰ)E | 3 | 450 | 140 | 32 | 300 | 14 | XP1120 | 7.35 10.5 11.5 | 13.36 | 2.72 | 8.9×8.9×2.98 | ||
| JKM-3.25×4(Ⅱ)E | P2H800 | 15.74 | 2.72 | 8.5×8.7×2.98 | |||||||||
| JKM-3.5×6(Ⅰ)E | 3 | 790 | 220 | 35 | 300 | 14 | XP1250 | 22.85 | 4.06 | 11.5×9.2×3.15 | |||
| JKM-3.5×6(Ⅱ)E | P2H900 | 25.6 | 4.06 | 10.5×9.2×3.15 | |||||||||
| JKM-3.5×6(Ⅲ)E | 21 | 4.06 | 8×9×3.2 | ||||||||||
| JKM-4×4(Ⅰ)E | 3.2 | 690 | 180 | 39.5 | 300 | 14 | XP1250 | 7.35 10.5 11.5 | 18.5 | 4.1 | 9×10×3.63 | ||
| JKM-4×4(Ⅱ)E | P2H900 | 24.7 | 4.1 | 9×10×3.63 | |||||||||
| JKM-4×4(Ⅲ)E | 16 | 4.1 | 7.5×9×3.63 | ||||||||||
| JKM-4×6(Ⅲ)E | 3.2 | 1030 | 270 | 39.5 | 300 | 22 | 6.5 | 9×9×3.63 | |||||
| JKM-4.5×6(Ⅲ)E | 3.6 | 1330 | 340 | 45 | 300 | 16 | 30 | 10 | 12×9.5×3.9 | ||||
| JKM-5×6(Ⅲ)E | 4 | 1600 | 420 | 50 | 300 | ||||||||
(2)JKMD Floor type multi-rope friction mine hoist
| Model | Head sheave diameter | Wire rope | Maximum lifting speed | Reducer | Displacement weight of rotating parts (except motor and guide wheel) | Head sheave displacement weight | Dimensions (L×W×H) | Note | ||||
| Maximum static tension | Maximum static tension difference between two wire ropes | Maximum diameter | Interval | |||||||||
| m | kN | mm | m/s | Model | Velocity ratio | t | t | m | ||||
| JKMD-2.25×2(Ⅰ)E | 2.25 | 105 | 25 | 22 | 300 | 10 | ZZP560(2) | 11.5 | 4.83 | 1.2×2 | 7.7×9×2.1 | In this table, weights and dimensions do not include micro - drag devices |
| JKMD-2.25×4(Ⅰ)E | 215 | 65 | XP800(2) | 7.35 10.5 11.5 | 6.5 | 2.3×2 | 6.8×9.5×2.3 | |||||
| JKMD-2.8×2(Ⅱ)E | 2.8 | 165 | 45 | 28 | XP800(2) | 4.911 5.165 5.239 | 1.528×2 | 7.8×10×2.65 | ||||
| JKMD-2.8×4(Ⅰ)E | 335 | 95 | XP1000(2) | 9 | 3.44×2 | 8.5×10×2.65 | ||||||
| JKMD-2.8×4(Ⅱ)E | P2H800(2) | 10.2 | 3.44×2 | 7.5×10×2.65 | ||||||||
| JKMD-3.5×2(Ⅰ)E | 3.5 | 265 | 70 | 35 | XP1000(2) | 12 | 3.1×2 | 7×9.5×3.02 | ||||
| JKMD-3.5×4(Ⅰ)E | 525 | 140 | 13 | XP1120(2) | 20.6 | 6.3×2 | 8.5×9.5×3 | |||||
| JKMD-3.5×4(Ⅱ)E | P2H800(2) | 22.8 | 6.3×2 | 8×9.5×3.02 | ||||||||
| JKMD-3.5×4(Ⅲ)E | Related products: Blast furnace feeding winch | |||||||||||
