Luoyang Zhongtai Industrial Co., Ltd.
Our Values Trust and reputation are a channel in the success and prosperity of ZTIC. Through valued employee loyalty and expertise ZTIC gives its customers a high degree of confidence. Through a
Add to Cart
Selective Crusher Used For Raw Coal Crushing And Screening Ore Dressing Equipment
1. Selective Crusher Ore OFDressing Equipment Product Description:
Working process of selective crusher:
The raw coal is fed into the rotating cylinder from the 30° chute at the feeding end. There are 55× 75mm screen holes on the cylinder wall. The raw coal smaller than 50mm is screened out by the screen section, and the blocks larger than 50mm are constantly lifted and dropped by the lifting plate. The coal and some gangue are broken to less than 50mm, through the sieve hole on the cylinder body and the raw coal less than 50mm together into the sieve funnel, sent to the main washing workshop by belt conveyor. The large gangue on the screen is discharged into the discharge funnel through the rotating cylinder, and finally sent to the gangue mountain. The continuous operation of the selective crusher completes the crushing, screening and sorting of raw coal.
2.Selective Crusher Ore OFDressing Equipment Product parameters:
(1) φ 2600X5000 selective crusher parameters
| 1. Effective diameter of drum | 2600mm |
| 2. Effective length of drum | 5000 mm(Includes domain screen section) |
| 3. Roll Angle | d=0°(Horizontal arrangement) |
| 4, drum speed | 13.7 r/min |
| 5. Maximum feeding granularity | 300mm |
| 6. Discharging particle size | ＜50mm |
| 7. Number of material drops | 8—9times |
| 8. Processing power | 300 t/h(Amount of raw coal) |
| 9. Motor | Model :JO2-72-6 Unit:2 sets |
| 10. Reducer | Model :PM650-Ⅵ-3z 1 set Speed ratio:i=15.75 |
| 11. Total weight of machine (without load) | 40.9 t |
| 12. Dimensions: L × W × H | 9580×3410×4910mm |
(2) φ 2400X3200 selective crusher parameters
| 1. Effective diameter of drum | 2200 mm |
| 2. Effective length of drum | 3200mm(Includes domain screen section) |
| 3. Roll Angle | d=0°(Horizontal arrangement) |
| 4, drum speed | 13.7 r/min |
| 5. Maximum feeding granularity | 300mm |
| 6. Discharging particle size | ＜50mm |
| 7. Number of material drops | 8—9 times |
| 8. Processing power | 120t/h(Amount of raw coal)) |
| 9. Motor | Model :Y2 200L-6 Capacity:18.5kw Rev:970 r/min Unit:2 sets |
| 10. Reducer | Model :KD80-A 1 set KD80-B 1 set Speed ratio:i=15.75 |
| 11. Total weight of machine (without load) | 40.9 t |
| 13. Dimensions: L × W × H | 9608×2854×4180mm |
(3) φ 2000×3200 selective crusher parameters
| 1. Effective diameter of drum | 1800mm |
| 2. Effective length of drum | 3200mm(Includes domain screen section)) |
| 3. Roll Angle | d=0°(Horizontal arrangement) |
| 4, drum speed | 10.8 r/min |
| 5. Maximum feeding granularity | 300mm |
| 6. Discharging particle size | ≤50mm |
| 7. Number of material drops | 8—9times |
| 8. Processing power | 80t/h(Amount of raw coal) |
| 9. Motor | Model :Y160M1-4 Capacity :11kw Rev:1460 r/min Unit:2 sets |
| 10. Reducer | Model :KDK08 1 set Unit: 2 sets Speed ratio:i=24.92 |
| 11. Total weight of machine (without load) | 15.2 t |
| 14. Dimensions: L × W × H | 9608×2140×2730 mm |
