Luoyang Zhongtai Industrial Co., Ltd.
Our Values Trust and reputation are a channel in the success and prosperity of ZTIC. Through valued employee loyalty and expertise ZTIC gives its customers a high degree of confidence. Through a
Add to Cart
High Efficiency SEM512 Single Drum Road Roller And Soil Compactor
1. Key Applications and characteristic of Road Roller For Heavy Duty Construction Machinery
SEM510 and SEM512 SCOM are widely used in road work, sub-base, parking lots, site development, water and sewer trench work, hills and uneven terrain.
(1)High Reliability: Hydrostatic drive system with world class variable
displacement piston pump and motors delivers leading in class reliability
(2)High Productivity: Dual amplitude and frequency vibration system enable the operator to achieve better compaction result
(3)High Efficiency: Up to 45% grade ability allows the machine to work efficiently on slop and uneven terrains
2. Cab& Operation System of Road Roller For Heavy Duty Construction Machinery
Canopy standard,Cabin +A/C optional
Big room,superior front, side and rear visibility
SEM512/510 is hydro-static compactor. The operation system is very simple, it just has two control levers, one for throttle control, another one is for forward/backward and brake control
A/C with interior cycle/out side fresh air cycle selection for better defog capability
Safety belt is standard
3. Optional Accessories of Road Roller For Heavy Duty Construction Machinery
| Configeration (O=Optional) | SEM510 | SEM512 |
| Soft CAB+AC | √ | √ |
| Compaction meter | √ | √ |
| Cold Start(Air Inlet Heater,-20C) | √ | √ |
| Rear rain wiper(Cab Only) | √ | √ |
| Radio(AM, FM)(Cab Only) | √ | √ |
| Pad Foot Shell Kit | √ | √ |
4. Specifications of Road Roller For Heavy Duty Construction Machinery
| Items | Unit | SEM510 | SEM512 |
| Engine Specification | |||
| Emission | China Stagell | China Stagell | |
| Std Rated Power-Gross | kW | 97.5 | 97.5 |
| Rated Speed | r/min | 2,200 | 2,200 |
| Composite Work Cycle Fuel Consumption(I/hour) | N.m/rpm | 560/1,400-1,600 | 560/1,400-1,600 |
| Ambient Capability-STD Sea Level | Deg C | ||
| Ambient Capability-HA Sea Level | Deg C | 49 | 49 |
| Ambient Capability-Cold Weather | Deg C | -10 | -10 |
| Operating Specifications | |||
| Machine Mass w/Std Config | kg | 10,000+3% | 12,000+3% |
| Weight at Drum w/Std Config | kg | 5,900+3% | 6,900+3% |
| Weight on Rear Axle | kg | 4,100 | 5,100 |
| Static Linear Load | N/cm | 217 | 317 |
| Max. Grade Ability w/o vibbration | % | 45 | 45 |
| Articulated Angle | du | 33±1 | 33±1 |
| Turning Radius Inside Drum Edge | mm | 5,990 | 5,990 |
| Compaction Width | mm | 2,130 | 2,130 |
| Travel Speed | |||
| Lo Range | km/h | 0 to 5.5 | 0 to 5.5 |
| Hi Range | km/h | 0 to 12 | 0 to 12 |
| Hydraulic Cycle Time | |||
| Full Turn Time | s | 6±0.5 | 6±0.5 |
| Vibratory System | |||
| Freqency-Hi/Lo | HZ | 33/30 | 33/30 |
| Amplitude-Hi/Lo | mm | 0.90/1.80 | 0.90/1.80 |
| Centrifugal Force-Hi/Lo | KN | 130/215 | 150/245 |
| Dimensions | |||
| Machine Dimensions[L*W*H] | mm | 5,815*2,290*3,130 | 5,815*2,290*3,130 |
| Oscillation Angle | ° | 10±1 | 10±1 |
| Wheelbase | mm | 2,900 | 2,900 |
| Tread Width | mm | 1,600 | 1,600 |
| Drum Width | mm | 2,130 | 2,130 |
| Drum Diameter | mm | 1,590 | 1,600 |
| Tire Specs | 23.1-2612PR12 | 23.1-2612PR12 | |
| Tire Pressure Setting | Mpa | 0.35 | 0.35 |
